How To Build Your Closet Shelves?
September 16, 2022

Building your closet shelves is a great way to save money and get the storage you want. Here’s a guide to building your closet shelves.

Tools and Materials

You’ll need a tape measure, stud finder, level, drill and wood glue. You’ll need plywood, lumber for the frame, clothes rod and optional shelf brackets for materials. Finish your plywood with two coats of white paint, depending on your preference.

Take Measurements

To get started, measure the width and height of your closet space. Then, use a stud finder to locate the studs in the walls. Mark the stud locations on the wall with a pencil so you’ll know where to drill pilot holes later.

Paint the Walls

If you’re going to paint your closet shelves, now is the time to do it! We recommend painting the walls before attaching anything to them, but if you prefer, you can wait until after the shelves are installed.

Find and Mark Studs

Use a stud finder to locate the studs in your walls and mark their locations with a pencil. This will help you when it comes time to drill pilot holes for attaching the shelves.

Design Your Closet Organizer

Now it’s time to start planning your closet shelves! Decide how many shelves you want and where you want them to go. Then, use a tape measure to determine each shelf’s dimensions.

Make a Cut List

Once you know the dimensions of your shelves, it’s time to make a cut list. This will help you keep track of all the pieces you need to cut from the plywood.

Choose Wood Finishing

Now that you’ve cut all the pieces for your closet shelves, it’s time to choose a finish. If you paint the shelves, we recommend using a primer and two coats of paint. For a natural look, you can use a stain or sealer.

Plan Your Layout

Before attaching anything to the walls, it’s important to plan your layout. This will help ensure that your shelves are level and evenly spaced.

Start Cutting!

Once you’ve planned your layout, it’s time to start cutting! Use a circular saw or jigsaw to cut the plywood according to your cut list. Using a jigsaw, use a sharp blade for the best results.

Pre-Finish Your Plywood

If you paint your shelves, we recommend pre-finishing the plywood before assembling them. This will make it easier to get a smooth, even finish.

Glue up Boards

To assemble your shelves, start by applying wood glue to the edges of the plywood. Then, fit the pieces together and clamp them until the glue dries.

Add Edge Banding

If you’re using paintable edge banding, now is the time to attach it! This will give your shelves a clean, finished look.

Assemble the Closet

Once the glue has dried, it’s time to assemble your closet shelves! Start by attaching the shelves to the wall using screws. Then, add the clothes rod and any other features you desire.

Attach Rest of Edge Banding

If you’re using edge banding, finish attaching it now. Be sure to trim off any excess with a sharp knife.

Install the Clothes Rod

The last step is to install the clothes rod. Screw it into place on the shelves, and you’re finished!

Conclusions

Building your closet shelves is a great way to save money and get the needed storage space. By following these simple steps, you can build strong and stylish shelves. So what are you waiting for? Get started today!